Cameras

Reconstruct supports three models of 360 cameras, as shown in the table below.

* Normal walking speed is 275 ft/min.

Overall, we recommend using the Insta360 One R due its higher resolution, superior image quality, and internal stabilizations. This camera can generate decent quality point clouds without using a stabilizer, however the best results can be obtained by using Insta360 One R and a stabilizer. Garmin Virb and Ricoh Theta V can also be used. In this case, users must walk slower and use a stabilizer.

Low-Light Conditions

Lighting is one of the most important factors in 360 video captures. Generally, it is not recommended to perform captures in low-light conditions. However, if captures must be made under low-light conditions, external lighting should be used. Among the supported camera models, Insta360 One R have the best low light performance.

Stabilizers (Gimbals)

In all cases, we highly recommend purchasing a 360 stabilizer (e.g. Feiyu Tech G6 Plus Gimbal) to use with the camera. Stabilizers are very useful in eliminating motion blur that results from walking or turning during the capture.

Additional Equipment

• Large capacity micro SD card to use with any of the above cameras. We recommend 128 GB or higher.
• Selfie stick/monopod in case you need to hold the camera at a higher elevation than you can reach with your hand.
• Extra batteries for the camera and stabilizer
• External lighting panels or lanterns:
  • https://www.dewalt.com/products/storage-and-gear/jobsite-lighting-and-flashlights/tool-connect-20v-max-allpurpose-cordless-work-light-tool-only/dcl074
  • https://lumecube.com/products/panel-go